Getting started
- Choose Create account, pick what you collect (rocks, gems, minerals, fossils, or any mix) and enter your email.
- Open the confirmation email and tap its link. Your account is not ready until you do. If it does not arrive, check your spam folder.
- Log in. Tick Remember me to stay logged in for 24 hours on that device.
Put it on your phone's home screen
iPhone: open Rock Cabinet in Safari, tap the Share button, then Add to Home Screen.
Android: open it in Chrome, tap the menu (three dots), then Install app (choose this, not “Create shortcut”, so you get the long-press shortcuts below). If you already added a plain shortcut, remove it and install the app instead.
Shortcuts (Android): once the app is on your Home Screen, press and hold its icon to jump straight to Quick add, Scan a label, Add a specimen or Find a specimen. If they do not appear, remove the icon and add it again. iPhones do not offer these.
On an iPhone the Home Screen icon is what makes offline Quick add and Find work in the field. See
Working with no signal.
The top bar has the Rock Cabinet logo, which takes you Home to your specimen list, then +Add +Quick Find Scan +Wish and the gear for the Control panel. To keep everything on one line, a phone shows Find, Scan and +Wish as small icons (a magnifying glass, a QR code and a heart), and Help as a round ?. Press and hold an icon to see its name. Log out is at the bottom of the Control panel.
Adding specimens
Add (full form)
Tap +Add, fill in what you know and save. Only a title is needed; every other field is optional. Photos can be taken with the camera or chosen from your gallery. When you choose a Category, the form changes at once to show the fields that suit it (see Fields by Category).
Quick add (in the field)
Start with the Source photo at the top. A photo of the seller’s label can fill in the name and origin for you (see Reading the seller’s label).
Tap +Quick for a short form made for speed: a name, a photo or two, and where you are. Finish the full record later from your Specimens list. If your phone gives a location, it is filled into the GPS field. For something you found yourself, tick Self-collected: use the GPS field for Origin under Origin and the coordinates are copied into Origin (also on Add and Edit). Untick it to get your own text back. Origin is shown wherever Origin is shown, including to guests and on the map, so leave it unticked for a spot you want to keep private.
Photos
- Each specimen can have several photos, up to the number allowed by your plan. The source photo (for example a photo of the label or the seller's listing) is kept separately and does not count against that number.
- Improve photos in the Control panel can tidy photos as you upload them. It is optional.
- Free accounts have a small "RockCabinet.com Free Account" mark on full-size photos. It is added when the photo is shown and your saved original is never changed.
Reading the seller’s label
On Quick add, take or choose a photo of the label in the Source photo box at the top. Rock Cabinet reads the words on your own phone, then:
- suggests the name, found by matching the words against the mineral, rock, gem and fossil name lists for what you collect. A small misreading, such as one wrong letter, is corrected and marked “closest match”;
- suggests the Origin from the lines under the name, such as the mine, town and country.
It only fills a Title that is empty (or still says Needs Review) and an Origin that is empty, so anything you typed is kept. Tap Undo beside the message to remove the suggestion. Always check the suggestion before saving. The reader can misread a letter, for example “France” as “Prance”.
- Switch it off or on: use the two check boxes under the Source photo, one for the name and one for the Origin. Each device remembers its own choice.
- Variety names: a label that says just “Amethyst” or “Citrine” is matched to its variety (for example Quartz var. Amethyst), and the label is read twice, a second time with extra clean-up, if the first read finds no name.
- Add and Edit: the Source photo on the full Add and Edit forms can be read too.
- For the best read: hold the phone steady and square to the label, close enough that the words fill most of the picture, in good light and without glare. Small print under plastic or a blurred photo is often unreadable.
- First time: the first photo downloads the free reading software (about 10 MB), so you need a signal once. After that it is remembered on your phone.
- Best results: a flat, well-lit photo of a printed label. Handwriting, glare, tiny print and shiny labels are harder to read.
- Privacy: the photo is not sent anywhere to be read. Only the words that were read are sent to Rock Cabinet to match against the name lists.
Needs Review
Tick Needs Review on anything you want to come back to (an uncertain ID, a missing locality). It is hidden from guests who open your share link.
Working with no signal
Many good collecting spots have no cell service. Two things work offline:
- Quick add saves your entry on the phone and sends it when you are back online. A message tells you it is "not saved yet" until it is sent.
- Find searches a copy of your catalog kept on the phone, so you can check whether you already own something while standing in a shop.
Set it up once
- Open Rock Cabinet with a signal after logging in. Let it load for a moment.
- Open +Quick and Find once while online. This saves them on your phone.
- On iPhone, use the Home Screen icon (see Getting started).
Sending later
When you are back online, open the app. Waiting entries are sent automatically. On iPhone this happens when you open the app, not in the background. On Android it also happens while the app stays open.
In offline Find, tap a result to expand it in place. The link to the full record needs a signal.
Finding things
- Search at the top of Specimens looks across your fields.
- Sort and filter by category, locality and other fields from the Specimens list.
- The alphabet strip jumps to a letter.
- Find in the top bar is the fast lookup. It works offline.
Fields
Control panel > Fields controls what your specimen form asks for. You can rename a field, change the order, hide a field you do not use (its data is kept) or add your own. The List order setting decides which columns appear on the Specimens list.
Fields by Category
Not every field makes sense for every specimen. A fossil has a Formation but no Hardness; a mineral has a Streak but no Fossil Type. When you pick a Category on +Add or +Quick, the fields that do not apply are tucked away straight away. A line under the Category tells you how many are hidden and links to the settings.
Choose what shows
- Open Control panel > Fields by category (or tap the link under the Category on the form).
- Pick a Category from the list.
- Tick the fields you want shown for it and tap Save. Title, Specimen Number, Category and Needs Review are always shown.
- To use the same choices for other Categories, open Use the same choices for other Categories, tick them, then Save.
- Back to suggested returns that Category to the suggested fields.
Hiding a field never deletes anything. If a specimen already has something in a hidden field, that field is still shown when you edit it. On a specimen’s page, hidden fields are left out only when they are empty. Categories not on the list, and a form with no Category picked yet, show every field.
What you collect
Control panel > What you collect is one page for three choices:
- Collecting types: rocks, gems, minerals, fossils. This only chooses which fields, Category choices and outside reference links you are offered. Nothing is locked in and nothing is lost. You can add a type later and switch back.
- Name suggestions: as you type a name, matching names are offered. Turn them on or off for each type.
- Duplicate warning: a gentle notice if a name or origin already exists. You can add anyway.
The same page lists names you saved yourself, and links to Reference links (outside sites such as mineral databases that appear on a specimen). A link is only shown when its page exists: the first time a name is looked up, the app quietly asks the site, and a link to a page the site says does not exist is left out. If the site cannot be reached or does not answer, the link stays.
QR labels
A QR label is a small square code you stick on a specimen, a drawer, a shelf or a box. Point your phone’s normal camera at it and tap the link that appears.
- A specimen label opens that specimen’s page.
- A shelf, drawer or box label opens a list of the specimens recorded in that place, each linking to its page.
Print one label
Open a specimen and tap Print a QR label for this specimen. Choose the size and whether to print the number and title under the code, then Print.
Print many labels
- Open Control panel > Print labels.
- Choose Labels for Specimens, or Shelves, drawers and boxes.
- Specimens: pick a Category and/or a range of specimen numbers. Shelves and boxes: choose the field that says where things are kept (for example Storage Location), tick the places you want and add any new ones, one per line.
- Choose your paper: Avery 5160 (US Letter), Avery L7160 (A4), your own sheet size, or a roll printer that prints one label per page.
- Leave Only specimens with no printed label yet ticked to skip specimens that already have a label (the page tells you how many are waiting).
- Choose the code size and which fields to print as text, then tap Show labels and Print.
- After the labels have printed, tap Mark these as printed under the sheet. They are skipped next time, and each specimen’s page shows the date its label was printed. Forget all printed marks at the bottom of the page starts over.
Print a test page on plain paper first, with Draw label outlines ticked, and hold it against a label sheet to check the fit. In the print window use scale 100% and margins None. Use Skip the first labels to finish a sheet you have already part used.
How small can the code be?
The code holds only a short web address, so it stays small. In our tests a phone read it at 5 mm; 6 mm or more is a safe choice. Print a test sheet to find the smallest your phone reads on the single label page prints codes at several sizes so you can try your own phone and printer.
Good to know
- A label only opens for someone logged in to your catalog. Anyone else sees the login page, and the code contains no catalog information.
- A label from a different Rock Cabinet account shows a “Different account” message.
- If you delete a specimen, its label says the specimen was not found. Shelf labels can be printed before anything is stored there; they start working as soon as you record that place on a specimen. Place names are matched without regard to capital letters.
Scanner, live camera and voice typing
Scan a label in the app
Tap Scan in the top menu (or use the Scan a label shortcut on your Home Screen icon). The screen stays on while the camera is open. Allow the camera when your browser asks, then point it at a Rock Cabinet QR label. A specimen label opens that specimen; a shelf, drawer or box label lists what is kept there. The Light button turns on the flashlight if your phone has one. If the camera is blocked or you would rather not use it, tap Scan a photo and choose a picture of the label. A code that is not a Rock Cabinet label for your catalog is not opened. On an iPhone the first scan downloads a small free reader, so you need a signal once.
Live camera for photos
Tap Camera on a photo slot and a camera screen opens inside Rock Cabinet.
- Guide: a dashed square helps you center the specimen and keep photos the same size. Tap Guide to hide it.
- Scale spot: choose Coin spot or Ruler strip and a yellow marker shows where to lay a real coin or ruler, so the true size is in the picture. The marker itself is not saved in the photo.
- Zoom, focus and light: if your phone allows it, Zoom and Focus sliders appear, and Light turns on the flashlight. Zoom in for small crystals and tap Focus to refocus. A phone that cannot do these simply does not show them.
- Screen stays on: the phone will not go to sleep while the camera screen is open.
- Several in a row: each shot goes into the next empty photo slot (“Photo 2 of 5”). It closes by itself when the slots are full, or tap Done. On Quick add the label reader still reads your photo.
- Switch it off: Control panel > Sound, vibration, voice & camera lets each device go back to its own camera app.
Speak instead of typing
A small microphone button sits beside text boxes on Add, Edit and Quick add. Tap it, speak, and the words are added to the box (they replace “Needs Review” in a Title). Tap it again to stop. It uses your browser’s own voice typing, so it works in Chrome on Android and Safari on iPhone, needs a signal, and asks for microphone permission the first time. It does not appear on number or GPS boxes. If it says it is not allowed, tap the lock beside the web address and allow the microphone. Hide the buttons in the same Control panel page.
Map and globe
Rock Cabinet can show where your specimens came from. It uses the Origin field (and the Mine name if you fill it in).
Step 1: find the places
Open Control panel > Map locations and tap Look up places. Each different Origin is looked up once and remembered, about one per second, so a big collection takes a few minutes. Each place gets a label showing how exact it is: exact site, town or area, region, country only, set by you or not found. The list shows places that need attention first.
- Not found or wrong: type the coordinates (for example
35.1234, -97.5678; south and west are negative) or paste a Google Maps link, then tap Set. A place you set by hand is never replaced.
- Look up again tries a place once more (for example after you correct the spelling on the specimen). Hide keeps a place off the map.
- Origins work best written like Town, State, Country or Mine, Town, Country. A country or state on the end without a comma (“Lima Peru”, “Sterling Hill Mine NJ”) is understood too. Where the Origin only names a country or region, the pin is marked approximate.
- Specimens you add later: open the specimen and tap Find on map, or run Look up places again.
Step 2: see them
- Control panel > Map and globe: an interactive globe (or a flat map: tap Flat map). Green pins are exact sites, orange are approximate, red are Wanted. A numbered circle groups nearby specimens: tap it to zoom in. Tap a pin to see its photo, name and Origin, and tap the name to open the specimen. Use the Category list, the search box and the Wanted switch to narrow what is shown, and Show all to fit everything on screen again.
- On a specimen page: the Map card has Google Maps, Google Earth and Show on my map buttons.
- Google Earth file: on the Map locations page, tap Download for Google Earth (.kml), then open the file in Google Earth (on a computer: Projects > Open > Import KML file). Click a pin in Earth to see its details and an “Open in Rock Cabinet” link. Specimens from the same place fan out around it so each can be tapped.
Turning the map on or off
On the Map locations page, Who can use the map has two switches. Turn off People who log in to hide the map everywhere for your own logins. Turn on Guests to let people who view your shared catalog use the map too. The guest map is off until you turn it on. Guests only see pins for specimens and details they can already see: the Origin field must be visible to guests (Fields), and Wanted, wish-list and disposed specimens are never shown to them.
Needs a signal: place lookups and the map pictures come from OpenStreetMap, and the map program is loaded from the internet the first time. Only place names are sent for lookups, never your name, photos or other details.
Display cards and tent cards
A display card is a printed card for a shelf, a case or a show table. Print on card stock, then cut it out along the corner marks.
Make cards
- For one specimen, open it and tap Make a display card. For several, open Control panel > Display cards and choose a Category and/or a range of specimen numbers (up to 60 at a time).
- Choose the size of the card face, from 3.5 x 2 in up to 7 x 5 in, or enter your own in millimetres. Tick Turn the card sideways for a tall card.
- Choose the type: a flat card, a tent card with the same on both sides, or a tent card with the front only.
- Tick the fields to show (the title is always shown), choose whether to show the field names, and choose a photo on the left, on top or none. Add a QR code in the corner if you like.
- Tap Show cards, check the preview, then Print.
Tent cards
A tent card is printed twice as tall as it stands and folded along the middle line. With same on both sides the top half is printed upside down, so it reads correctly from the back once folded. Front only leaves the back blank. A faint fold line and small tick marks at the sides show where to fold.
Perky box inserts
The size list includes inserts for the three common Perky box sizes: 1 1/4 in (30 x 25 mm), 2 in (47 x 47 mm) and 2 2/3 in (64 x 64 mm). Boxes vary a little between makers, so cut one card from plain paper and check the fit first. If it is tight or loose, choose Custom and adjust. On cards this small the photo is left off and the QR code shrinks to fit.
In the print window use scale 100% and margins None, and choose card stock if your printer has that setting. Print a test page on plain paper first. The text shrinks by itself to fit the card, so a long title or many fields still fit.
Sharing and PDF catalog
- Share link is on the Fields page. Turn it on to get a read-only link anyone can open without a login. Making a new link cancels the old one; turning it off closes it.
- Share one specimen: open a specimen and use Share this specimen at the bottom. On a phone, Share… opens your phone’s own share menu so you can pick any app. On a computer, use the buttons for Facebook, X, Reddit, Pinterest, WhatsApp, Bluesky or email, or Copy link. The link preview shows the specimen’s photo.
- Specimen of the day: on the Fields page, under Specimen of the day, choose Personal or Public (it needs your share link to be on). Each day one specimen is picked at random and shown at the top of your shared collection. Only specimens that guests can already see and that have a photo are used; Wanted, wish-list, disposed and Needs Review specimens never are. You get a link you can post on other websites (it changes every day, and shows the picture when posted on Facebook or in a text), and a Pick another one today button. With Public, Rock Cabinet may also feature that day’s specimen on its log-in page and public Specimen of the day page, and may share it on other websites and social media to show what Rock Cabinet is; you also get the link to the public Specimen of the day. Choose Off at any time to stop.
- Name and description: on the Fields page, under Collection name and description, you can give your collection a name (up to 60 characters) and a short description (up to 200). People who open your share link see them at the top of your collection, and they appear in the preview when the link is posted on Facebook or sent in a text. They are plain text and optional. New accounts are offered this right after sign-up.
- Looking at someone else’s collection: open their share link while you are logged in. You see their collection as a guest, and you stay logged in to your own. A bar at the top has a Back to my catalog button. On a specimen page, Add to my wanted adds its name and picture, with a WANTED ribbon, to your own Wanted list. Only the name and the picture are copied, never the other details.
- Photo marks: photos seen through a share link carry a small mark, “RockCabinet.com Free Account” on free accounts or “Hosted on RockCabinet.com” on paid ones. It is added when the photo is shown. Your saved original is never changed, and the source photo is never shared.
- PDF catalog in the Control panel creates a printable catalog or index. You can include the source photo as a thumbnail, and put a QR code at the top right of each catalog page; scan it (while logged in) to open that specimen.
Look and feel
- Style: use the style menu in the top bar to pick Rock Cabinet, Classic, Warm paper, Header band or Dark. On a phone the menu is in Control panel > Sound, vibration, voice & camera. Each device remembers its own choice.
- Click sound and vibration: Control panel > Sound, vibration, voice & camera turns a soft click and a short buzz on or off when you tap. Vibration is on and sound is off to begin with. Use the Test buttons to try them. The choice is kept on that device only, so set it on each phone or computer you use.
iPhones and iPads do not allow web pages to vibrate, so only the sound is available there. A phone in silent mode may also mute the click.
Import, export and backup
- Export CSV downloads your records as a spreadsheet file.
- Import CSV adds records from a spreadsheet. You will see a preview before anything is saved.
- Backup & restore makes one ZIP of your fields, specimens and full-size photos. Download one before big changes. Restoring replaces everything currently in the account, so make a fresh backup first.
Update my fields
When Rock Cabinet adds a field to its standard list (for example Dimensions), your collection does not get it automatically, so nothing changes under you. Open Control panel → Update my fields, tick the new fields you want and tap Add ticked fields. Each one is placed where it belongs in the standard order. Nothing you already have is changed, and your specimens are not touched. If you deleted a field on purpose, leave it unticked.
Wish list
Tap +Wish to record something you want: a title, notes and a photo of the piece or listing. Wish items are kept apart from your owned specimens.
Friends
When someone shares a collection with you, open their link and tap Add to my friends in the bar at the top. The collection is saved on your Friends page (Control panel → Friends), so you can open it again without hunting for the link. You can also paste a share link on that page.
Opening a friend’s collection shows it to you as a guest, and you stay logged in to your own. Only the collection’s name, its description and its share link are saved in your catalog, and the owner is not told. If the owner turns sharing off or makes a new link, the entry says it no longer works and you can remove it. You can save up to 100.
The Friends page shows a new badge on a friend when they have added specimens that you can see since you last opened their collection from that page. Mark all as seen clears every badge.
When friends have added specimens you have not seen, a small orange dot appears on the Control panel button, and a one-line note appears at the top of your specimen list. Tap the note to go to your Friends page, or the × to hide it until there is more news.
Your account
- Forgot password: use the link on the login page. A reset email is sent to your address.
- Change my password / email / users: Control panel > Users.
- Upgrade, update your card or cancel: Control panel > Plan & billing (shown when online billing is on). Payment is taken on Stripe's secure page. If a payment fails you keep full access for 14 days to fix the card. If a paid plan ends, the account moves to the free plan and nothing is deleted.
- Plans: the plan sets how many specimens and photos you can keep and which tools are available. See What it does for current plans.
- Free accounts that are not used for 90 days are removed. We email you first, with a reminder before the deadline. Logging in keeps it active.
Troubleshooting
- No confirmation email: check spam. If it is still missing, use Contact.
- Offline page says "not saved yet": open Quick add or Find once with a signal, then try again.
- Changes not showing: pull down to refresh, or close and reopen the app.
- Something else: use Contact and choose a topic. We read every message.
Tutorials coming soon
Short how-to guides with screenshots will be added here. Ideas on the list: setting up your first collection, photographing specimens, a day in the field with Quick add, and preparing a catalog to share.
Want one on a particular topic? Tell us.